A Penhallow company - serving Orange County, CA
An open living room and dining area after a whole-home remodel

Belgard Construction Service Nationwide

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Orange County
A built-in window seat in a bay window
A dining nook with a built-in banquette
A home office with a built-in desk and shelves
An open living space after a whole-home remodel
A remodeled living room with built-in shelves around the fireplace
A wood double vanity with two mirrors after a bathroom remodel
A finished backyard cottage with a small covered porch
A remodeled primary bathroom with a soaking tub and walk-in shower
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

Your dream remodel for as low as$199/month*On approved credit; ask for current terms
Get your free estimate

Why Orange County Homeowners Choose Belgard Construction

Belgard construction service in Orange County means pavers, walls, and hardscape that hold up to Santa Ana winds, coastal salt air, inland heat, and the region’s patchwork of HOA rules and local building codes. Penhallow Remodeling Orange County is an independent Belgard service provider, not a manufacturer-authorized dealer, which means we recommend the right fix whether it’s a repair, a rebuild, or a new installation. We work with Belgard Catalina Slate, Lafitt Grana, Dublin Cobble pavers, and Weston Stone wall block throughout Orange County, from Irvine’s older tracts near the Spectrum to the 1950s-era stucco neighborhoods of Anaheim and Garden Grove. Call (424) 541-1701 to talk through your project with someone who has actually pulled up failed pavers and rebuilt bases the right way.

Trevor Nash and our crews have spent years diagnosing Belgard failures across Orange County’s varied microclimates. That experience matters because a paver patio in coastal Newport Beach fails differently than one in inland Yorba Linda, and the fix is never interchangeable. We train our crews on Belgard’s dimensional tolerances, base specifications, and edge-restraint systems, so we can tell whether a failure is a material issue, an installation shortcut, or a drainage problem. That distinction determines whether a repair costs $400 or the whole surface needs re-laying.

Why Trust Penhallow Remodeling Orange County for Your Belgard Construction?

A remodeled primary suite with built-in wardrobes and a window seat

Belgard pavers only perform as well as the base underneath them, and that’s where the difference between a five-year patio and a twenty-year patio lives. Trevor Nash learned the construction trade at Los Angeles Trade-Technical College and has spent decades managing crews across Southern California, including Orange County projects where homeowners are constantly correcting bad hardscape work done by the previous contractor. His signature line applies to every Belgard job we take: “Give you the number first, then pick up the tool.”

We’re an independent Belgard service provider, which means we have no incentive to upsell you into a product you don’t need. When a Dublin Cobble patio in Mission Viejo shows edge-spread and sinking sections, we don’t quote a full replacement if the pavers themselves are sound. We excavate, rebuild the base, re-lay the same cobbles, and lock the edges properly. That’s the kind of repair that saves a homeowner five figures and lasts.

Our 365-Day Done Right Promise applies to every Belgard patio, driveway, and retaining wall we build or repair. If the work fails inside the guarantee period, we come back and fix it at no charge. That promise is in writing on every project, alongside a written price before any work starts.

Explore

Styles & brands we work with

Kitchen remodeling
Kitchen remodeling
Bathroom remodeling
Bathroom remodeling
Home additions & ADU
Home additions & ADU
Roofing
Roofing
Windows & doors
Windows & doors
Driveway & pavers
Driveway & pavers
Fence
Fence

Common Belgard Construction Problems We Fix in Orange County

  • Efflorescence blooming on Catalina Slate pavers near the coast. In Orange County’s coastal fog zones, moisture wicks through unsealed paver joints and draws salts to the surface, leaving a chalky white haze. This isn’t a paver defect; it’s a moisture and joint-material problem. We remove the efflorescence chemically, correct the drainage path, and re-joint with a flexible polymeric sand that breathes.
  • Dublin Cobble pavers shifting and creating trip hazards. In older Orange County tracts with expansive clay soils, an inadequate base or missing edge restraint lets pavers drift. We regularly see this in neighborhoods where a previous installer used sand over native clay with no compacted aggregate. The fix is a full re-base with Class II road base, geotextile fabric, and aluminum edging.
  • Lafitt Grana surface spalling from thermal cycling. Orange County’s inland heat plus cold nights causes pavers to expand and contract. When joints are filled with too-rigid polymeric sand, the paver faces crack and flake. We re-joint with a flexible sand rated for the temperature swing and replace any pavers with surface loss.
  • Weston Stone retaining walls leaning or bulging. Behind most failing retaining walls in Orange County, you’ll find no geogrid reinforcement and no drainage aggregate. Water pressure builds behind the wall, and the face starts to push outward. We rebuild with proper drainage stone, perforated pipe, and geogrid where the wall height requires it.
  • Faded, chalky surfaces on older Belgard installations. UV exposure and sealant breakdown cause color fade on Belgard pavers over a decade or more. We clean, re-sand, and apply a high-quality paver sealer that restores color without trapping moisture, which is the mistake cheap sealers make.

Belgard Parts & Our Repair-vs-Replace Approach

A remodeled staircase with wood treads and a slim metal railing

We use only genuine Belgard pavers, caps, and wall blocks for replacements, because color and texture matching matters when you’re patching a section of an existing surface. Aftermarket look-alike pavers never match the original blend, and a mismatched patch draws the eye every time you walk past it. For base, drainage, and edge restraint, we specify quality aggregate, perforated pipe, and aluminum or concrete edging that meets or exceeds Belgard’s installation guide. Those components aren’t branded, but they’re the difference between a surface that drains and holds and one that sinks.

The decision to repair versus replace comes down to paver condition, base condition, and what the homeowner actually needs. If the pavers are intact but the base has failed, we re-lay. If the pavers are spalled, faded beyond sealing, or fractured, replacement is the honest call. If you’re unsure which camp you’re in, call (424) 541-1701 and we’ll tell you straight, in writing, before any work starts.

Our Belgard Service Process – Step by Step

  1. 1
    Diagnosis. We start with a site walk, checking base depth, edge restraint, joint condition, drainage flow, and paver integrity. We identify whether the failure is material, installation, or water-related. You get the diagnosis explained in plain terms, with the cost to fix it in writing.
  2. 2
    Repair or installation. We excavate to the proper depth, install geotextile fabric, compact Class II road base in lifts, screed bedding sand, and lay Belgard pavers to the manufacturer’s dimensional tolerances. Edges are locked with aluminum paver edging, never left loose.
  3. 3
    Jointing and compaction. We sweep polymeric sand into the joints, compact the surface with a plate compactor, and apply a second sand pass. This locks the pavers in place and keeps sand from washing out in Orange County’s occasional downpours.
  4. 4
    Warranty walk. Before we leave, we walk the entire surface with you, point out the drainage paths, and hand you a written warranty that includes our 365-Day Done Right Promise. If anything fails inside that window, we’re back at no charge.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Belgard Products We Service & Install in Orange County

A finished basement family room with a media wall and wet bar

We work with Belgard Catalina Slate pavers, Lafitt Grana pavers, Dublin Cobble pavers, and Weston Stone wall block. That covers most paver patios, driveways, walkways, and retaining walls in Orange County, from small 300-square-foot back patios in Anaheim to full driveway replacements in Irvine. We stock a rotating supply of common Belgard pavers for repairs and source complete pallets for new installations through local Orange County distributors, so turnaround doesn’t stall while we wait on a truck from a warehouse three states away.

When your project also touches the house, we bring the same written-price discipline to full kitchen remodeling, bathroom remodels, and whole-home work. A Belgard patio off the back of a kitchen you’re redoing should be handled by one contractor who can coordinate both scopes.

We Also Service These Brands

Our crews work with KraftMaid and Wellborn cabinetry, Cambria, Silestone, and Caesarstone countertops, Kohler and Moen fixtures, and James Hardie siding. Penhallow Remodeling Orange County is a multi-brand remodeling contractor, not a single-product shop, so your Belgard patio and your kitchen remodel don’t have to involve two different companies.

FAQs – Belgard Construction Service in Orange County

Is Penhallow Remodeling Orange County authorized by Belgard?

No. We are an independent Belgard service provider. We install and repair Belgard pavers and walls using genuine Belgard products and Belgard’s published installation specifications, but we are not a manufacturer-authorized dealer. That independence means our recommendation is based on what your Orange County property actually needs, not on a brand agreement.

Why are my Belgard Catalina Slate pavers turning white and chalky, and can that be fixed?

That white chalky film is efflorescence, and it’s caused by moisture wicking through the pavers and carrying salts to the surface, often through unsealed joints near Orange County’s coastal fog zones. In most cases, we can remove it with a proper efflorescence cleaner and re-joint with a flexible polymeric sand that reduces the moisture path. If the drainage issue underneath isn’t corrected, the efflorescence will return, so we always address the water path, not just the stain. Call (424) 541-1701 for a diagnosis and a written price.

Can you match the color of my existing Belgard Dublin Cobble if I need a section replaced after a plumbing trench cut?

Yes. Dublin Cobble is a blended paver with multiple tones in each unit, and matching a section requires ordering from the same production run or blending pavers from multiple pallets to match the existing surface. We use only genuine Belgard Dublin Cobble for replacements and feather the new pavers into the old pattern so the patch doesn’t read as an obvious rectangle. Depending on the age and fading of the surrounding surface, we may also clean and seal the entire patio so the old and new sections blend. Call (424) 541-1701 if you have a trench cut or a damaged section.

My Belgard retaining wall is leaning a few degrees – does it need to be rebuilt or just pushed back?

A leaning Weston Stone retaining wall almost always means the drainage behind it failed or was never installed. Pushing it back without fixing the water pressure is a temporary fix, and the wall will lean again in a season or two. We rebuild the wall with proper drainage aggregate, a perforated pipe at the base, and geogrid reinforcement where the wall height requires it. That’s the only repair that holds. Call (424) 541-1701 and we’ll assess the wall and write up the scope.

Can you install Belgard pavers over my existing concrete patio, or must it be removed?

We can install Belgard pavers over a structurally sound concrete slab using a thin-set approach or a sand-set overlay, but we don’t recommend it over a slab with cracks, heaving, or drainage problems, because the failure will telegraph through the pavers. In an Orange County home with a cracked or spalling patio slab, removal and a proper base rebuild is the longer-lasting fix. We’ll look at your slab and give you a straight answer on which approach makes sense.

How much does Belgard construction cost in Orange County?

Service Price Range
Paver Patio Installation $3,500 – $11,000
Paver Driveway Installation $7,000 – $18,000
Kitchen Remodel $14,000 – $45,000

Paver patio cost depends on square footage, base depth, paver line, and whether we’re removing an existing surface. A basic 300-square-foot Catalina Slate patio over a proper 6-inch base runs toward the lower end. A driveway with heavier vehicle loads, deeper excavation, and larger-format pavers climbs toward the top. Call (424) 541-1701 to schedule a free estimate with a written, line-item price before any work starts.

Book Your Belgard Service in Orange County, CA

If your Belgard pavers are sinking, spalling, or blooming white, or you’re planning a new patio or driveway, call Penhallow Remodeling Orange County at (424) 541-1701. We’ll walk the site, explain exactly what’s failing, and hand you a written price and a written guarantee before a single paver is pulled.

Written by Trevor Nash, Owner at Penhallow Remodeling Orange County, offering our General Contractor services in Orange County since 2004.

Getting started with Penhallow in Orange County

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead measuring a kitchen with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A remodeling crew arriving at a home with lumber and tools

Your Orange County team

A local crew that works across Orange County and the towns around it, to the same written standard as every Penhallow location.

Areas we serve
A worker laying floor protection and a dust barrier before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help in Orange County? Licensed & insured · Free on-site estimates response · free estimates
Call (424) 541-1701
Local Service Coverage

Request a Free Estimate in Orange County

Tell us what you need - Penhallow Remodeling Orange County responds fast. No obligation.

By providing your information above, you confirm you have read our Privacy Policy and agree that you may be contacted via phone, email, or SMS about your request, including by the independent contractors we may refer it to.

Prefer to text? Text Us
Call Now - 24/7 Dispatch