







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
ES Windows Fence Installation: The Orange County Owner’s Guide
ES Windows fence installation in Orange County typically runs $3,500 to $9,000, installed. That’s the honest range we quote most homeowners, and it includes the fence system, hardware, concrete for posts, and labor from a crew that actually shows up. Most people find us the day they notice a gate post leaning, a latch that no longer lines up, or an older ES Windows fence frame that has started pulling away from the wall after a few wet winters. Give you the number first, then pick up the tool.
We’re an independent Orange County contractor, not affiliated with ES Windows, but our crews know their fence and window hardware lines well. If you’ve got an ES Windows product and the fence around it has failed, you’re in the right place.
Which ES Windows Models This Applies To

ES Windows has been used in a lot of Southern California builds, especially in Orange County coastal and hillside homes where the window systems meet exterior fence runs. The fence installation we handle covers the perimeter fencing, gate frames, and post systems that tie into ES Windows window and door openings on patios, pool enclosures, and balcony runs. If your ES Windows unit has a manufacturer label on the frame edge, that’s the fastest way we match the right fence section. The label usually includes a series code and glass spec, and we cross reference it before ordering anything.
The big compatibility gotcha: ES Windows fence frames are not a universal size. Older mid-2000s units often use a narrower post channel than current production, and mixing the two leaves you with a gate that sags within a season. We measure the existing post spacing and gate hinge centers before recommending a part. On the OEM versus aftermarket question, we’ll tell you straight: for load-bearing gate posts and hinge hardware, we prefer the OEM or a spec-matched equivalent. For non-structural fill sections, a quality aftermarket extrusion often saves $400 to $900 on a typical Orange County job without changing the look.
Styles & brands we work with







Signs Your ES Windows Fence Installation Is Failing
- Gate post leaning or pulling from the mounting surface. In Orange County’s clay-heavy soil, posts set in shallow concrete shift after heavy rain. The fix is usually a deeper set with proper drainage, not just shimming the post.
- Latch and strike plate no longer line up. This is rarely just “settling.” It means the frame has racked, and forcing the latch will eventually crack the stile on the gate leaf.
- Fence section pulling away from the ES Windows frame. The fasteners have stripped or the original install skipped a proper backing plate. On stucco walls near the coast, we see this constantly because the substrate behind the stucco was never reinforced.
- Rust bleeding from hinge screws or post bases. Coastal air in Huntington Beach and Newport eats uncoated hardware fast. Once rust stains show, the hardware is usually past saving and the surrounding metal needs attention too.
- Squealing or grinding when you open the gate. That’s metal on metal. Lubricating buys you a week; the hinge barrel is already worn out of round and the gate leaf weight is tearing up the frame.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

In Orange County, a full ES Windows fence replacement or new installation lands between $3,500 and $9,000. A straightforward 40-to-60-foot run with one gate typically sits in the $3,500 to $5,500 range. You cross $6,000 when the job needs custom post fabrication, stucco repair at the mounting points, or hillside access where we’re setting posts by hand instead of driving them.
Every price we give is written. That number includes removing the old fence sections and hardware, the new fence material matched to your ES Windows configuration, concrete and fasteners, and cleanup. No change orders because we measured wrong. The work carries our 365-Day Done Right Promise: if anything fails within a year, we come back and fix it at no charge. That’s in writing before we start.
DIY or Call Us?
You can safely check the screw tightness at the hinge plates and note where the post meets the concrete. What you should not do is remove a gate leaf that weighs more than you expect while standing on a sloped driveway, or try to reset a post in a footing that needs digging below a gas line. We’ve pulled enough bent gate panels off homeowners’ legs to say this plainly: gate hardware under tension is not a weekend project.
If the post is straight and the latch still catches, you’ve got time to budget. If the post is leaning or the gate won’t close, call (424) 541-1701. We’ll send a background-checked, uniformed crew to look at it, and the estimate is free.
FAQs

A properly installed ES Windows-compatible fence in Orange County lasts 20 to 30 years for aluminum frames and 15 to 25 years for hardware, depending on coastal exposure. Salt air in beach cities shortens hardware life significantly. Call (424) 541-1701 and we’ll tell you what your specific location is doing to the metal.
Yes, in about 60 percent of cases. If the frame is racked or the post footings are undersized, repair buys you months, not years. If the damage is confined to hardware and one or two fill sections, repair is the smarter spend. The estimate will show both options in writing.
Most single-gate ES Windows fence replacements in Orange County take one to two days. Larger multi-gate properties with stucco repair run three to four days. We set the arrival window before the crew comes out, and we hit it.
We stock common hinge, latch, and post cap hardware for ES Windows fence systems, plus standard fence extrusions. Custom post lengths and specialty gate hardware are ordered and arrive within a week. If you need it faster, we’ll tell you what’s realistic before you commit.
If your ES Windows fence is failing and you want a written price before anyone picks up a tool, call (424) 541-1701 to schedule your free estimate. Trevor and the crew know this hardware, and we’ll walk every phase with you before work starts.
Written by Trevor Nash, Owner, Penhallow Remodeling Orange County at Penhallow Remodeling Orange County, serving Orange County and nearby areas.


